Cart0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Crafter's Choice Loaf - Guest Silicone Mold 1502 Crafter's Choice Loaf - Guest Silicone Mold 1502
Previous

Crafter's Choice Rectangle Basic Silicone Mold 1601

Previous

Crafter's Choice Square Guest Silicone Mold 1609

Crafter's Choice Loaf - Guest Silicone Mold 1502

Quick Overview

Makes Makes (1) 11 ounce loaf (312 g approx.).
Measures: 2" x 8" x 1.25"
 

Availability: In stock

$0.00

* Required Fields

$0.00

Details

Makes Makes (1) 11 ounce loaf (312 g approx.).
Measures: 2" x 8" x 1.25"
Glossy finish provides added strength to the mold and attractive finish to the loaf. The loaf is perfectly straight without rounded corners. Mold walls are built with extra thickness to prevent bowing. Do not overfill.

Directions:

Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.

Points of Interest:
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF (260ºC)

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register